Zoom the image with the mouse
Permatex High-Temperature Red RTV Silicone Gasket Maker - 3 Oz
SKU:
197186
UPC:
686226811608
$10.99
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable "formed-in-place” gaskets that resist cracking, shrinking, and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent resists auto and shop fluids.
Benefits
- High temperature use
- Superior adhesion and flexibility
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Easy application
- Non-flammable
- Non-toxic
Typical applications
- Drive housings
- Exhaust manifolds
- Thermostat housings
- Valve covers
- Timing gear covers
- Water pumps
- Differential covers
Suggested applications
Automobile
Valve covers, oil pans, timing covers, and thermostat housings.
Directions
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex brake & parts cleaner
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16" to 1/4" bead
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn
- Silicone will skin over in one hour and fully cure in 24 hr under normal conditions. Allow more time for cold or very dry conditions
- Clean uncured silicone from hands, tools, and clothing with fast orange hand cleaner
Specifications
- Size: 3 oz
- Temperature range: -65ºF to 650ºF (-54°C to 343°C)
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable "formed-in-place” gaskets that resist cracking, shrinking, and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent resists auto and shop fluids.
Benefits
- High temperature use
- Superior adhesion and flexibility
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Easy application
- Non-flammable
- Non-toxic
Typical applications
- Drive housings
- Exhaust manifolds
- Thermostat housings
- Valve covers
- Timing gear covers
- Water pumps
- Differential covers
Suggested applications
Automobile
Valve covers, oil pans, timing covers, and thermostat housings.
Directions
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex brake & parts cleaner
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16" to 1/4" bead
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn
- Silicone will skin over in one hour and fully cure in 24 hr under normal conditions. Allow more time for cold or very dry conditions
- Clean uncured silicone from hands, tools, and clothing with fast orange hand cleaner
Specifications
- Size: 3 oz
- Temperature range: -65ºF to 650ºF (-54°C to 343°C)
