Zoom the image with the mouse
Permatex Form-A-Gasket #2 Sealant - 3 oz
SKU:
404848
UPC:
686226800169
$8.99
Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-54°C to 204°C) resists gasoline, oil, and grease.
Permatex form-a-gasket no. 2 sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.
Suggested application
Automobile & marine
Valve cover gaskets, oil pan gaskets.
Directions
- Clean surfaces thoroughly
- Pierce top
- Apply a thin, even film to both mating surfaces
- Air-dry a few minutes until the film becomes "tacky"
- Assemble and tighten into position
- Wipe excess clean
Benefits
- Improves reliability
- Extends gasket life
- Stops leakage
- Excellent for metal to metal assemblies
- Slow drying
- Flexible setting
Typical applications
- Valve cover gaskets
- oil pan gaskets
- Threaded connections
- Cover plates
- Hose connections
For cleanup
- The product can be removed from metal surfaces with isopropyl alcohol. If the sealant has been dried for a long time or at high temperatures, cover the sealant with alcohol and allow to soften overnight
- Clean hands with permatex brand hand cleaners
Note: To remove sealant from hands, use isopropyl alcohol or denatured alcohol.
Specifications
- Size: 3 oz
- Temperature range: -65°F to 400°F (-54°C to 204°C)
WARNING: This product can expose you to chemicals including Toluene, Ethylbenzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-54°C to 204°C) resists gasoline, oil, and grease.
Permatex form-a-gasket no. 2 sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.
Suggested application
Automobile & marine
Valve cover gaskets, oil pan gaskets.
Directions
- Clean surfaces thoroughly
- Pierce top
- Apply a thin, even film to both mating surfaces
- Air-dry a few minutes until the film becomes "tacky"
- Assemble and tighten into position
- Wipe excess clean
Benefits
- Improves reliability
- Extends gasket life
- Stops leakage
- Excellent for metal to metal assemblies
- Slow drying
- Flexible setting
Typical applications
- Valve cover gaskets
- oil pan gaskets
- Threaded connections
- Cover plates
- Hose connections
For cleanup
- The product can be removed from metal surfaces with isopropyl alcohol. If the sealant has been dried for a long time or at high temperatures, cover the sealant with alcohol and allow to soften overnight
- Clean hands with permatex brand hand cleaners
Note: To remove sealant from hands, use isopropyl alcohol or denatured alcohol.
Specifications
- Size: 3 oz
- Temperature range: -65°F to 400°F (-54°C to 204°C)
WARNING: This product can expose you to chemicals including Toluene, Ethylbenzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
