Mobil Delvac 1300 Super 15W-40 Synthetic Blend Diesel Engine Oil - 1 gal

Mobil Delvac 1300 Super 15W-40 is a synthetic blend diesel engine oil that helps extend engine life, allowing you to run your business with confidence. This oil meets or exceeds original equipment manufacturer (OEM) requirements and deliver high performance in both on- and off-highway applications.

Fully backward compatible, Mobil Delvac 1300 Super 15W-40 engine oil delivers high performance in both newer and older heavy-duty engine.

Carefully tailored formulation provides

• Extended oil drain interval (ODI) potential up to 1.5X the average OEM ODI recommendation
• Up to 50 percent more wear protection than required in API engine tests
• Outstanding oxidation stability
• Excellent soot and viscosity control

Developed in close collaboration with OEMs, Mobil Delvac 1300 Super 15W-40 engine oil is recommended for use in a wide range of heavy-duty applications and operating environments in the trucking, mining, construction, agricultural and marine industries. Accordingly, this oil also meets or exceeds the requirements of API CK-4, CJ-4, CI-4 PLUS, CI-4 and CH-4 service categories, as well as key OEM requirements. Mobil Delvac 1300 Super 15W-40 engine oil is universal, meaning it may also be used in gasoline engines requiring the API SN specification.

Mobil Delvac 1300 Super 15W-40 Diesel Engine Oil is recommended by ExxonMobil for use in

• The latest heavy-duty diesel engines, including those equipped with aftertreatment systems and EGR
• Diesel applications using older and naturally aspirated conventional design
• On-highway heavy-duty trucking and off-highway applications including trucking, mining, construction, agriculture and marine
• On-highway applications operating in both high speed/high load and short haul pick-up/delivery service
• Off-highway applications operating in severe low speed/heavy load conditions using up to 500 PPM sulfur fuels
• High-performance gasoline engines requiring API SN and mixed fleet operations
• Diesel-powered equipment from American, European and Japanese OEM

Average OEM ODI recommendation based on recommended oil drain intervals from major U.S. engine manufacturers using API CJ-4 oils for a variety of service severity levels and engine models. Average OEM ODI API CJ-4 recommendation to substantiate multiplier claims is 31,750 miles. Results may vary based on vehicle/engine condition, driving and environmental conditions. Consult OEM or Exxon Mobil before implementing extended ODIs, especially if the equipment/vehicle is under the OEM’s Warranty.

Features

Mobil Delvac 1300 Super is formulated with optimized base oil technology, containing severely hydro-processed base stocks and a tailored additive system to deliver extended performance for up to 50% beyond OEM-recommended oil drain Intervals1. This proprietary formulation delivers excellent wear protection, outstanding oxidation stability, and outstanding TBN retention. Mobil Delvac 1300 Super also provides outstanding resistance to oil consumption, oxidation, corrosive and abrasive wear, and high temperature deposits.

• Meets demanding specifications of key OEMs and latest API gasoline service category
• One engine oil for mixed fleet operation
• Outstanding oxidation stability
• Extended ODI capability. Reduced low temperature sludge build-up and high temperature deposits
• Excellent soot and viscosity control
• Greater engine efficiency, long engine life and long oil life
• Outstanding TBN reserves
• Corrosion protection and extended drain intervals for both new and old engines using up to 500 PPM sulfur diesel fuel
• Low temperature fluidity and pumpability
• Formulated for smooth starting in cold weather
• Resistance to corrosive and abrasive wear
• Long life of critical wear surfaces
• Long gasket and seal life
• Low ash formulation meeting API CK-4 and CJ-4 requirement
• Long emissions aftertreatment life (DPF, DOC and SCR)

Application

Recommended for the latest heavy duty diesel engines operating in extreme conditions, including those equipped with aftertreatment systems and EGR

• Recommended for diesel applications using older and naturally aspirated conventional design
• On-highway heavy-duty trucking and off-highway applications including trucking, mining, construction, agriculture and marine
• On-highway applications operating in both high speed/high load and short haul pick-up/delivery service
• Off-highway applications operating in severe low speed/heavy load conditions using up to 500 PPM sulfur fuel
• Diesel-powered equipment from American, European and Japanese OEMs

Specifications

• Grade: SAE 15W-40
• Ash, sulfated, mass%: 0.9
• Density @ 15 C, G/ml: 0.8751
• flash point, Cleveland open cup: 225°C
• Hi-Temp Hi-Shear viscosity @ 150 C 1x10(6) Sec(-1), MPa.s: 4
• Kinematic viscosity @ 100 C, Mm2/s: 14
• Kinematic viscosity @ 40 C, Mm2/s: 109
• Pour Point: -33
• Total base number, MgKOH/g: 9.4
• Size: 1 gal