Zoom the image with the mouse
Rust-oleum Half Pint Specialty High Heat Brush On Paint - Bar-b-que Black
SKU:
353243
UPC:
020066777876
$12.99
Rust-oleum specialty high heat retains color and finishes up to 1200º f. Apply to grills, wood-burning stoves, radiators, engines, and other metal items. Provides rust protection and a rich, satin finish.
High heat is designed to renew and protect metal surfaces subject to heat up to 1200°f (648°c). This durable satin finish retains excellent color retention after repeated heating. Ideal for the exterior of barbeque grills, wood stoves, radiators, fire pits, fireplace screens, automotive parts, and more.
Features
- Indoor/outdoor
- Durable, Corrosion-resistant
Applications
Sprays: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle do not strike can. Contact rust-oleum. Shake often during use. Hold can upright 10-16 from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near an open flame.
Brush Goods: Mix thoroughly to ensure any settled pigment is re-dispersed. Thin material only if necessary with mineral spirits. For brush or roller application, thin no more than 5%. Do not thin with gasoline, lacquer thinner, turpentine, etc. Apply with a good quality brush, nap roller, or conventional spray gun. A second coat is not recommended.
Dry And Recoat Times
Sprays: Dries to touch in 30 min and to handle in 1-2 hr. Allow the paint to dry for 1 hour before heating. In order to achieve a full cure, the coating must be heat cured at 450ºf for one hour. The product may emit smoke and harmless odor.
Brush Goods: Dry and recoat times are based on 70ºf and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 2-4 hr, to handle in 5-9 hr, and is fully dry in 24 hr. Allow the paint to dry 24 hr before heating. When using the subject surface for the first time, open windows and provide ventilation as the new paint finish may emit smoke.
Cleanup
Sprays: Clean the valve immediately after use by turning can upside down and depressing the spray button for 3-5 sec. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in the home trash compactor.
Brush Goods: Clean brush, roller, and other tools with mineral spirits. Dispose of soiled rags properly.
Clogging
If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into the can valve opening.
Painting Conditions
Use outdoors or in a well-ventilated area such as an open garage. Use when the temperature is between 50-90ºf (10-32ºc) and humidity is below 85% to ensure proper drying. Priming is not recommended. Do not use on metal directly exposed to open flame or in direct contact with food, such as a grill grate. If using sprays, avoid application in very windy and dusty conditions. The cover surrounding area to protect from spray mist.
Surface Preparation
Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with a commercial detergent, or another suitable cleaning method. Rinse with freshwater and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
Warning
If you scrape, sand or remove old paint from any surface, you may release lead paint dust. Lead is toxic. Exposure to lead dust can cause serious illness, such as brain damage; especially in children. Pregnant women should also avoid exposure. Wear a niosh approved respirator to control lead exposure. Clean up carefully with a hepa vacuum and a wet mop.
Specifications
- Color: Bar-B-Que Black
- Size: 1 pt
- Resin Type: Modified Silicone
- Solvents: Aromatic Mineral Spirits
- Dry Heat Resistance: 1200°F (648°C)
- Flash Point: -156°F (-104°C)
Rust-oleum specialty high heat retains color and finishes up to 1200º f. Apply to grills, wood-burning stoves, radiators, engines, and other metal items. Provides rust protection and a rich, satin finish.
High heat is designed to renew and protect metal surfaces subject to heat up to 1200°f (648°c). This durable satin finish retains excellent color retention after repeated heating. Ideal for the exterior of barbeque grills, wood stoves, radiators, fire pits, fireplace screens, automotive parts, and more.
Features
- Indoor/outdoor
- Durable, Corrosion-resistant
Applications
Sprays: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle do not strike can. Contact rust-oleum. Shake often during use. Hold can upright 10-16 from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near an open flame.
Brush Goods: Mix thoroughly to ensure any settled pigment is re-dispersed. Thin material only if necessary with mineral spirits. For brush or roller application, thin no more than 5%. Do not thin with gasoline, lacquer thinner, turpentine, etc. Apply with a good quality brush, nap roller, or conventional spray gun. A second coat is not recommended.
Dry And Recoat Times
Sprays: Dries to touch in 30 min and to handle in 1-2 hr. Allow the paint to dry for 1 hour before heating. In order to achieve a full cure, the coating must be heat cured at 450ºf for one hour. The product may emit smoke and harmless odor.
Brush Goods: Dry and recoat times are based on 70ºf and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 2-4 hr, to handle in 5-9 hr, and is fully dry in 24 hr. Allow the paint to dry 24 hr before heating. When using the subject surface for the first time, open windows and provide ventilation as the new paint finish may emit smoke.
Cleanup
Sprays: Clean the valve immediately after use by turning can upside down and depressing the spray button for 3-5 sec. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in the home trash compactor.
Brush Goods: Clean brush, roller, and other tools with mineral spirits. Dispose of soiled rags properly.
Clogging
If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into the can valve opening.
Painting Conditions
Use outdoors or in a well-ventilated area such as an open garage. Use when the temperature is between 50-90ºf (10-32ºc) and humidity is below 85% to ensure proper drying. Priming is not recommended. Do not use on metal directly exposed to open flame or in direct contact with food, such as a grill grate. If using sprays, avoid application in very windy and dusty conditions. The cover surrounding area to protect from spray mist.
Surface Preparation
Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with a commercial detergent, or another suitable cleaning method. Rinse with freshwater and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
Warning
If you scrape, sand or remove old paint from any surface, you may release lead paint dust. Lead is toxic. Exposure to lead dust can cause serious illness, such as brain damage; especially in children. Pregnant women should also avoid exposure. Wear a niosh approved respirator to control lead exposure. Clean up carefully with a hepa vacuum and a wet mop.
Specifications
- Color: Bar-B-Que Black
- Size: 1 pt
- Resin Type: Modified Silicone
- Solvents: Aromatic Mineral Spirits
- Dry Heat Resistance: 1200°F (648°C)
- Flash Point: -156°F (-104°C)
