Easy Heat Automatic Pipe Heating Cable - 18'

EasyHeat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy-saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.

Features

• Fixed resistance, pre-terminated. For commercial and residential applications
• Keeps water flowing at ambient temperatures down to -40°F (-40°C)
• Cables are rated at 7 Wt per 1' (0.30 M)
• The built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
• Plugs into a standard 120 Vac outlet, must be GFCI protected
• Each cable consists of tough XLPE inner Insulation, a continuous ground braid and weather-resistant PVC (high-low Temperature) outer jacket
• Protects Metal And Plastic Water-filled Pipes Up To 1-1/2 In (38.1 Mm) In Diameter
• Pre-assembled And Ready To Install
• Available In 3' (0.9 M) increments up to 18' (5.5 M) and longer increments Up To 80' (24.4 M)
• Integral thermostat saves energy by powering the cable only when needed

Specifications

• Length: 18'
• Wattage: 126 W
• Warranty: 1 Year

Certifications

• UL Listed to Canadian safety standards and CSA certified when used in accordance with instructions on water-filled metal or plastic pipes

Accessories

• It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°F (+80°C) Temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories