Minwax Wood Finish Cherry Penetrating Stain - 1 qt

Minwax Wood Finish is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors.

Features

• Deeply penetrating color enhances wood’s beauty in one coat
• Dries in 2 hr.; makes it possible to stain in a day
• Resists lapping for even color
• Can be used to add beauty to any bare or stripped wood surface
• Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding and floors

How to Use

Preparation Warning

Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.

Preparation

• Start with bare/stripped wood that’s clean and dry
• Sand with #220-grit sandpaper in direction of the wood grain and remove sanding dust
• Apply Minwax Pre-Stain Wood Conditioner — especially on soft woods — for best, even color

Application Steps

• Test before staining on a hidden spot to make sure you like the color
• Stir stain well before and occasionally during staining. Don’t shake or thin stain
• Wipe away excess stain, working with wood grain to blend lighter/darker areas together. The longer you wait, the darker/richer the color
• To darken color, recoat. Do NOT sand between coats. If happy with the color, let dry completely before applying a protective topcoat

Project

Finish every project with a clear protective topcoat like Minwax Fast-Dry Polyurethane or Minwax Polycrylic Protective Finish.

Cautions

Danger: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. Cautions: contains aliphatic hydrocarbons. Contents are combustible. Keep away from heat and open flame. Vapor harmful. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (niosh approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. First aid: in case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call poison control center, hospital emergency room, or physician immediately. Delayed effects from long term overexposure. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Warning: this product contains chemicals known to the state of california to cause cancer and birth defects or other reproductive harm. Do not take internally. Keep out of the reach of children.

Warranty

Satisfaction guarantee limited warranty. This warranty is made to you, the product purchaser who owns the property where the product is applied. This warranty is not transferable except that if a contractor purchased and applied the product to the property for you, then the warranty is transferable to you. If this product, when applied and maintained according to product application and maintenance instructions to a properly prepared surface, fails to perform to your complete satisfaction, minwax shall, upon presentation of proof of purchase, either replace an equivalent quantity of product free of charge or refund the original purchase price. For a replacement or refund please contact customer service at 1-800-523-9299. This warranty shall not apply to any defect, damage, or product failure resulting from improper surface preparation, structural defects, environmental damage, failure of a previous product, deterioration or defect in the underlying substrate, or improper application or maintenance of the product. Your exclusive remedy, and minwax's sole liability, under this warranty is the replacement of product or refund and does not include labor or costs associated with the application or removal of any product. In no event shall minwax be liable for any type of incidental, consequential, special, exemplary, punitive, or indirect damages whether or not purchaser is advised of the possibility of such damages. All implied warranties, including warranties of merchantability and fitness for a particular purpose, shall have the same duration as the above express warranty. Some states do not allow limitations on how long an implied warranty lasts or limitations on incidental or consequential damages, so portions of the limitations above might not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.

Specifications

• Color: Cherry
• Size: 1 qt
• For Use In Location: Interior
• Opacity: Semi-Transparent
• Dry to Recoat: 2-3 hr.
• Dry Time: 2-3 hr.
• Cleanup: Mineral Spirits
• Coverage: 500 ft²/gal - 600 ft²/gal
• Warranty: Satisfaction Guarantee Limited Warranty

Safety Data Sheet.pdf

Technical Sheet.pdf