Minwax Fast-drying Polyurethane Finish - 11.5 Oz

Minwax Fast-Drying Polyurethane Is A Clear, Oil-based, Durable Protective Finish.

Features

• Fast-Drying Polyurethane Is A Clear, Oil-based, Durable Protective Finish
• Provides Long-lasting Beauty And Protection To Any Interior Wood Surface
• Among The Most Durable Coatings For Wood Protection
• Ideal For Woodwork, Furniture, Doors, Cabinets And Floors
• Can Be Used On Both Finished And Unfinished Wood

Directions

• Surface Must Be Dry And Free Of Old Finishes In Poor Condition, Paint, Wax, Grease, Polish, Dirt Or Other Foreign Matter.
• Sand To Obtain A Smooth Uniform Surface. Remove All Dust With A Cloth Dampened With Mineral Spirits.
• If Desired, Apply The Stain, Such As Minwax Wood Finish Or Minwax Gel Stain To Unfinished Wood Surfaces. Follow Directions For Application And Dry Times.
• Apply A Thin Coat Of Minwax Fast-Drying Polyurethane Using A High-quality Natural Or Foam Brush.
• For Floor Projects, Use A Square Buff Orbital Or Disk-type Sander With 220 Grit Sandpaper Or The Equivalent Grit Pad Or Screen (specifically Designed For Sanding Between Coats). Do Not Use A Belt Or Drum-type Sander For Sanding Between Coats.
• Apply Second Coat. If The Third Coat Is Desired, Repeat Step 6 Before Application.
• After Final Coat, Allow 24 Hours Before Light Use.

used On Hardwood Floors, Use A Lambswool Or Synthetic Pad Applicator Or Natural Bristle Brush And Maintain A Wet Edge To Avoid Lap Marks. For Maximum Durability, We Recommend Three Coats. Avoid Heavy Traffic And Replacing Of Furniture For 72 Hours After Final Coat. When Replacing Furniture, Do Not Slide. Do Not Install Rugs Or Clean Floors For 7 Days.

Warning

Removal Of Old Paint By Sanding, Scraping Or Other Means May Generate Dust Or Fumes That Contain Lead. Exposure To Lead Dust Or Fumes May Cause Brain Damage Or Other Adverse Health Effects, Especially In Children Or Pregnant Women. Controlling Exposure To Lead Or Other Hazardous Substances Require The Use Of Proper Protective Equipment Such As A Properly Fitted Respirator (NIOSH Approved) And Proper Containment And Cleanup.

Specifications

• Size: 11.5 Oz
• Sheens: Clear Gloss
• Application Tool: Natural Bristle Brush, Foam Brush, Or Lambswool Applicator
• Location: Interior Wood Surfaces
• Recoat: After 4-6 Hours
• Dry Time: 24 Hours Before Light Use
• Cleanup: Mineral Spirits Or Paint Thinner
• Coverage: 125 Sq.ft Per Qt
• Coats: 2-3
• Recommended Uses: Woodwork, Furniture, Doors, Cabinets And Floor

Safety Data Sheet.pdf