Zoom the image with the mouse
Easy Heat Automatic Pipe Heating Cable - 18'
SKU:
247285
UPC:
013627109551
$38.99
EasyHeat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy-saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
Features
- Fixed resistance, pre-terminated. For commercial and residential applications
- Keeps water flowing at ambient temperatures down to -40°F (-40°C)
- Cables are rated at 7 Wt per 1' (0.30 M)
- The built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
- Plugs into a standard 120 Vac outlet, must be GFCI protected
- Each cable consists of tough XLPE inner Insulation, a continuous ground braid and weather-resistant PVC (high-low Temperature) outer jacket
- Protects Metal And Plastic Water-filled Pipes Up To 1-1/2 In (38.1 Mm) In Diameter
- Pre-assembled And Ready To Install
- Available In 3' (0.9 M) increments up to 18' (5.5 M) and longer increments Up To 80' (24.4 M)
- Integral thermostat saves energy by powering the cable only when needed
Specifications
- Length: 18'
- Wattage: 126 W
- Warranty: 1 Year
Certifications
- UL Listed to Canadian safety standards and CSA certified when used in accordance with instructions on water-filled metal or plastic pipes
Accessories
- It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°F (+80°C) Temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
Want to learn more? Check out our related GrangeKnows articles
EasyHeat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy-saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
Features
- Fixed resistance, pre-terminated. For commercial and residential applications
- Keeps water flowing at ambient temperatures down to -40°F (-40°C)
- Cables are rated at 7 Wt per 1' (0.30 M)
- The built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
- Plugs into a standard 120 Vac outlet, must be GFCI protected
- Each cable consists of tough XLPE inner Insulation, a continuous ground braid and weather-resistant PVC (high-low Temperature) outer jacket
- Protects Metal And Plastic Water-filled Pipes Up To 1-1/2 In (38.1 Mm) In Diameter
- Pre-assembled And Ready To Install
- Available In 3' (0.9 M) increments up to 18' (5.5 M) and longer increments Up To 80' (24.4 M)
- Integral thermostat saves energy by powering the cable only when needed
Specifications
- Length: 18'
- Wattage: 126 W
- Warranty: 1 Year
Certifications
- UL Listed to Canadian safety standards and CSA certified when used in accordance with instructions on water-filled metal or plastic pipes
Accessories
- It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°F (+80°C) Temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
