Zoom the image with the mouse
Eclectic Clear E6000 Industrial Strength Mini Tube Adhesive - 0.18 Oz
SKU:
228949
UPC:
076818510314
$5.29
$3.99
(You save
$1.30
)
E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!
Features
- Tough – 2X stronger and 60X more flex than Polyurethane!
- Non-flammable once cured
- Chemical resistant – safe for applications exposed to dilute acids and dilute caustics
- Waterproof
- Washer/Dryer safe
- Paintable – paint to match surrounding area to make UV-resistant
- Temperature resistant – unaffected by extreme heat or cold once cured
- Flexible – excellent for bonding items subject to vibration
Instructions For Safe Use
- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use
- Puncture inner seal using pointer cap (if tube has a foil seal). Puncture inner seal. Ideal application temperature range is 50°F to 90°F (10°C to 32°C). However, fully cured adhesive can withstand temperatures from -40°F to 180°F (-40°C to 82°C) intermittently
- Apply directly to surfaces to be bonded or repaired
- Allow 24 hr. for curing–Maximum bond strength may not be reached for up to 72 hr.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap
- Clean uncured adhesive with acetone or citrus-based solvents
Specifications
- Color: Clear
- Size: 0.18 oz
WARNING: This product can expose you to chemicals including Toluene, Perchloroethylene (Tetrachloroethylene), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!
Features
- Tough – 2X stronger and 60X more flex than Polyurethane!
- Non-flammable once cured
- Chemical resistant – safe for applications exposed to dilute acids and dilute caustics
- Waterproof
- Washer/Dryer safe
- Paintable – paint to match surrounding area to make UV-resistant
- Temperature resistant – unaffected by extreme heat or cold once cured
- Flexible – excellent for bonding items subject to vibration
Instructions For Safe Use
- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use
- Puncture inner seal using pointer cap (if tube has a foil seal). Puncture inner seal. Ideal application temperature range is 50°F to 90°F (10°C to 32°C). However, fully cured adhesive can withstand temperatures from -40°F to 180°F (-40°C to 82°C) intermittently
- Apply directly to surfaces to be bonded or repaired
- Allow 24 hr. for curing–Maximum bond strength may not be reached for up to 72 hr.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap
- Clean uncured adhesive with acetone or citrus-based solvents
Specifications
- Color: Clear
- Size: 0.18 oz
WARNING: This product can expose you to chemicals including Toluene, Perchloroethylene (Tetrachloroethylene), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
