Hot Max Wire Feed Mig Welder - 135 amp
SKU:
1531035
UPC:
816002000241
$587.99
$529.19
(You save
$58.80
)
The Hot Max 135WFG MIG welder is ready to weld with shielding gas or flux core right out of the box.
Features
- Infinite output voltage controls which can be adjusted as you weld
- Infinite wire speed control
- Factory pre-wired and ready for optional spool gun (model #spg)
- Easy polarity change for switching between shielding gas and flux core wire
- Drive roller fits 0.023" to 0.035" wire
- Welds up to 5/16" with flux core wire
- Larger drive wheel available
- Light weight, small size all-steel case
- Wire at gun is "cold" when not welding
- Power on indicator light and overload indicator light equipped
- Built in wire feeder with easy to use tension adjustment lever
- Welds steel, aluminum, and stainless (special gas required for aluminum and stainless)
- Flux covered (fcaw) set up from the factory, ready to weld
Includes
- Ground clamp with 9' cable
- Mig gun with 10' hose
- Co2/argon regulator with 5' hose
- 2 lb spool of 0.030" flux core wire
- Gas nozzle for mig welding
- Hex wrench for wire feed roller
- 0.025", 0.030", and 0.035" contact tips
- 10 lb wire spool adapter
Warranty
- 2 year limited warranty on machine
- 90 day warranty on gun and hoses, for parts and labor
Specifications
- Input Current/Voltage: 20 amp at 120V, Single Phase
- Output: 25-135 amp DC
- Minimum Duty Cycle: 20%
- Length: 16"
- Width: 9-5/8"
- Height: 16-1/2"
- Weight: 54 lb
The Hot Max 135WFG MIG welder is ready to weld with shielding gas or flux core right out of the box.
Features
- Infinite output voltage controls which can be adjusted as you weld
- Infinite wire speed control
- Factory pre-wired and ready for optional spool gun (model #spg)
- Easy polarity change for switching between shielding gas and flux core wire
- Drive roller fits 0.023" to 0.035" wire
- Welds up to 5/16" with flux core wire
- Larger drive wheel available
- Light weight, small size all-steel case
- Wire at gun is "cold" when not welding
- Power on indicator light and overload indicator light equipped
- Built in wire feeder with easy to use tension adjustment lever
- Welds steel, aluminum, and stainless (special gas required for aluminum and stainless)
- Flux covered (fcaw) set up from the factory, ready to weld
Includes
- Ground clamp with 9' cable
- Mig gun with 10' hose
- Co2/argon regulator with 5' hose
- 2 lb spool of 0.030" flux core wire
- Gas nozzle for mig welding
- Hex wrench for wire feed roller
- 0.025", 0.030", and 0.035" contact tips
- 10 lb wire spool adapter
Warranty
- 2 year limited warranty on machine
- 90 day warranty on gun and hoses, for parts and labor
Specifications
- Input Current/Voltage: 20 amp at 120V, Single Phase
- Output: 25-135 amp DC
- Minimum Duty Cycle: 20%
- Length: 16"
- Width: 9-5/8"
- Height: 16-1/2"
- Weight: 54 lb