Zoom the image with the mouse
Zircon Studsensor Pro45 Stud Finder
SKU:
734127
UPC:
042186695861
$28.99
$26.99
(You save
$2.00
)
The deep-scanning StudSensor Pro45 stud finder features a patented ergonomic grip to make stud finding quick and simple. It features a bright user-friendly interface to locate the edges of wood and metal studs and joists while being warned of live, unshielded AC electrical wiring. Securely anchor pictures, mirrors, shelves, and more.
Features
- StudScan Mode locates the edges of wood and metal studs up to 3/4" (19 mm) deep
- DeepScan Mode doubles the scanning depth to 1-1/2" (38 mm) deep
- Ready light indicates when calibration is complete and tool is ready for use
- Edge arrow lights up sequentially as the tool approaches a stud and fully illuminates when the stud edge is located
- Zircon’s patented “over-the-stud” feature alerts if scan begins over a stud
- WireWarning Detection indicates the presence of live, unshielded AC electrical wiring up to 2" (50 mm) deep
- SpotLite Pointer shines an arrow-shaped image on the scanned surface to clearly indicate the edge of the stud
- A “V” marker groove enables accurate marking of stud edge location
- Ergonomic grip for a secure hold in either hand at any angle
Position Accuracy
- Wood Studs: Typically Within 1/8" (3mm) Using The Dual Scan And Mark Procedure
- Metal Studs: Typically Within 1/2" (13mm) Using The Dual Scan And Mark Procedure
Depth
- StudScan Mode: Up To 3/4" (19mm)
- DeepScan Mode: Up To 1-1/2" (3mm)
Specifications
- Battery Type: 9V Alkaline, Required
- Operating Temperature: 20° To 105°F (-7° To 41°C)
- Storage Temperature: -20° To 150°F (-29° To 66°C)
- Humidity: 5-90% RH (non-condensing)
- Water Resistance: Splash And Water-resistant, Not Waterproof
- WireWarning Depth: In Typical Wall With Romex Wiring, The Wire Canbe Detected Up To 2" (50mm) Deep
- WireWarning Position Accuracy: Typically 90-250V At 50-60Hz Within 6" (150mm) Of A Hot Unshielded Wire
- Weight: 4.4 Oz Without Battery
- Height: 6.78"
- Width: 2.84"
- Depth: 1.66"
The deep-scanning StudSensor Pro45 stud finder features a patented ergonomic grip to make stud finding quick and simple. It features a bright user-friendly interface to locate the edges of wood and metal studs and joists while being warned of live, unshielded AC electrical wiring. Securely anchor pictures, mirrors, shelves, and more.
Features
- StudScan Mode locates the edges of wood and metal studs up to 3/4" (19 mm) deep
- DeepScan Mode doubles the scanning depth to 1-1/2" (38 mm) deep
- Ready light indicates when calibration is complete and tool is ready for use
- Edge arrow lights up sequentially as the tool approaches a stud and fully illuminates when the stud edge is located
- Zircon’s patented “over-the-stud” feature alerts if scan begins over a stud
- WireWarning Detection indicates the presence of live, unshielded AC electrical wiring up to 2" (50 mm) deep
- SpotLite Pointer shines an arrow-shaped image on the scanned surface to clearly indicate the edge of the stud
- A “V” marker groove enables accurate marking of stud edge location
- Ergonomic grip for a secure hold in either hand at any angle
Position Accuracy
- Wood Studs: Typically Within 1/8" (3mm) Using The Dual Scan And Mark Procedure
- Metal Studs: Typically Within 1/2" (13mm) Using The Dual Scan And Mark Procedure
Depth
- StudScan Mode: Up To 3/4" (19mm)
- DeepScan Mode: Up To 1-1/2" (3mm)
Specifications
- Battery Type: 9V Alkaline, Required
- Operating Temperature: 20° To 105°F (-7° To 41°C)
- Storage Temperature: -20° To 150°F (-29° To 66°C)
- Humidity: 5-90% RH (non-condensing)
- Water Resistance: Splash And Water-resistant, Not Waterproof
- WireWarning Depth: In Typical Wall With Romex Wiring, The Wire Canbe Detected Up To 2" (50mm) Deep
- WireWarning Position Accuracy: Typically 90-250V At 50-60Hz Within 6" (150mm) Of A Hot Unshielded Wire
- Weight: 4.4 Oz Without Battery
- Height: 6.78"
- Width: 2.84"
- Depth: 1.66"
