Devcon 2 Ton Flow Mix Epoxy - 0.47 oz

  • Formulated for moderate strength
  • Water resistant
  • Automatically mixes the hardener and resin
Availability: In stock


A clear, extremely strong, non-shrinking adhesive, specially formulated for moderate strength and water resistance. Apply mixed epoxy directly to your repair area. The Flow-Mix nozzle automatically mixes the hardener and resin together.

  • Bonds are used Acrylic, China, Fiberglass, Metal, Wood, Concrete, Ceramic, Glass
  • Water-resistant
Tips and Tricks
  • Pull the plunger back slightly (1/8") to allow air bubbles to rise to the top so that you do not push air bubbles into the Flow-Mix nozzle
  • To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mixed in order for this product to cure properly
  • Use painters or masking tape to protect any areas from unwanted epoxy exposure. Remove tape before the epoxy cures
  • Handling Time: 30 mins
  • Set Time: 30 mins
  • Full Cure: 24 hrs
  • Temperature Range: -60°F to 180°F
  • Tensile Strength: 2500 psi
  • Color: Clear to light yellow
  • Size: 0.47 oz

Technical Sheet.pdf


Write Your Own Review
You're reviewing:Devcon 2 Ton Flow Mix Epoxy - 0.47 oz
Your Rating