
Olympic Waterguard Clear Multi-surface Waterproofing Sealant - 1 Gal
Olympic WaterGuard Clear Waterproofing Finish Provides Protection On Multiple Surfaces And Allows Your Wood To Weather And Gray Naturally.
Features
- Advanced Multi-Surface Protection
- Penetrates And Protects Against Water Damage
- Provides A Mildew-resistant Coating
- Use On Brick, Concrete, Stucco, Wood And More
- Waterproofing Clear Sealant
Coverage
One Gallon Covers Approximately 100 To 350 Sq. Ft Depending On Surface Texture And Porosity.
Area Preparation
Coatings And Contaminants Must Be Completely Removed From The Surface. Clean With The Appropriate Olympic Cleaner Prior To Applying The Product.
Warning
If You Scrape, Sand, Or Remove Old Paint, You May Release Lead Dust Or Fumes. Lead Is Toxic. Exposure To Lead Dust Or Fumes Can Cause Serious Illness, Such As Brain Damage, Especially In Children. Pregnant Women Should Also Avoid Exposure. Wear A Properly Fitted NIOSH-approved Respirator And Prevent Skin Contact To Control Lead Exposure. Clean Up Carefully With A HEPA Vacuum And A Wet Mop.
Application
Test A Small Area To Ensure Acceptable Appearance And Penetration. Apply One Thin Coat With A High-quality Brush, Roller Or Paint Pad Or By Spray Equipment. When Spraying Or Rolling, Always Back Brush For Best Results.
Application Temperature
Can Be Applied Down To 40°F And Up To 90°F.
Drying Time
Normally Dries In 12 - 14 Hours When Applied In Optimal Temperatures Of 50°F To 85°F.
Cleanup
Use Soap And Water To Clean Up Tools.
Specifications
- Color: Clear
- Size: 1 Gal
Olympic WaterGuard Clear Waterproofing Finish Provides Protection On Multiple Surfaces And Allows Your Wood To Weather And Gray Naturally.
Features
- Advanced Multi-Surface Protection
- Penetrates And Protects Against Water Damage
- Provides A Mildew-resistant Coating
- Use On Brick, Concrete, Stucco, Wood And More
- Waterproofing Clear Sealant
Coverage
One Gallon Covers Approximately 100 To 350 Sq. Ft Depending On Surface Texture And Porosity.
Area Preparation
Coatings And Contaminants Must Be Completely Removed From The Surface. Clean With The Appropriate Olympic Cleaner Prior To Applying The Product.
Warning
If You Scrape, Sand, Or Remove Old Paint, You May Release Lead Dust Or Fumes. Lead Is Toxic. Exposure To Lead Dust Or Fumes Can Cause Serious Illness, Such As Brain Damage, Especially In Children. Pregnant Women Should Also Avoid Exposure. Wear A Properly Fitted NIOSH-approved Respirator And Prevent Skin Contact To Control Lead Exposure. Clean Up Carefully With A HEPA Vacuum And A Wet Mop.
Application
Test A Small Area To Ensure Acceptable Appearance And Penetration. Apply One Thin Coat With A High-quality Brush, Roller Or Paint Pad Or By Spray Equipment. When Spraying Or Rolling, Always Back Brush For Best Results.
Application Temperature
Can Be Applied Down To 40°F And Up To 90°F.
Drying Time
Normally Dries In 12 - 14 Hours When Applied In Optimal Temperatures Of 50°F To 85°F.
Cleanup
Use Soap And Water To Clean Up Tools.
Specifications
- Color: Clear
- Size: 1 Gal