Loading...
425 psi Durability: Excellent; 20-year life Flexibility: Excellent Water Resistance: Excellent Exterior Weathering: Very good; adhesive not recommended for direct exposure to sunlight Staining: May stain marble Odor: Mild solvent Working Time: 10 min Minimum Cure Time: 24 hr Weight Per Gal: 9.4 lb (1.12 kg/l) Viscosity: 230,000 CPS Volatiles: 35% Solids: 65% Flammability: Extremely flammable; non-flammable when dry Flash Point: 1°F (-17°C) Coverage: 30 lineal ft. using 1/4" bead for 10 fl.oz VOC: < 40% by wt. (384 g/L) Certifications: ASTM C-557 Warranty: Limited Warranty " />

Liquid Nails Heavy Duty Construction Adhesive - 10 oz

  • Strong bond will outlast project
  • Exceptional holding power
  • Waterproof and Weatherproof
$2.99
Availability: In stock
SKU
152564

Details

Not available for sale to California customers

Liquid Nails Heavy Duty Construction Adhesive (LN-901/LNP-901) bridges gaps, provides ten minutes working time, and produces a durable, flexible, and impact-resistant bond on heavy materials. This formula contains added antioxidants for excellent all-weather performance.

Surface Preparation

Surfaces must be clean, dry and structurally sound.

Application
  • Cut nozzle at a 45° angle to the desired size.
  • Puncture inner seal with nail or wire.
  • Cabinets and countertops: Apply a 1/4" bead to contact areas on the back of cabinets or countertops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets.
  • Materials to furring strips or studs:  Apply zigzag 1/4" bead to each strip or stud to
    be covered by the panel. Position panel so edges meet at stud center; only severely warped materials require finishing nails at top and bottom.
Clean Up

Use mineral spirits or an adhesive remover

Disposal

Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.

Features
  • A strong bond will outlast the project
  • Bonds a wide range of construction materials
  • Waterproof & Weatherproof
  • Exceptional holding power
Recommended For
  • Plywood and waferboard
  • Treated lumber
  • Brick veneers
  • Tileboard
  • Exterior foam board (when applied below 90ºF)
  • Drywall
Not Recommended For
  • Flooring applications
  • Mirrors
  • Viny
  • Ceramics
  • Plastic
  • Marble
  • Granite
  • Ceiling tile
  • Subfloors/underlayment or 1/8" medium density fiberboard paneling
Specifications
  • Size: 10 oz
  • Base: Synthetic rubber and resin
  • Type: Solvent
  • Color: Tan
  • Appearance: Smooth
  • Application Temperature: 40°F–100°F(5°C – 38°C)
  • Service Temperature: -20°F–140°F(-29°C–60°C)
  • Adhesion: Excellent
  • Consistency: Short buttery
  • Bridging Ability: Excellent
  • Extrudability: Easy
  • Shear Strength: 24 hr – 225 psi, 48 hr – 300 psi, 7 days – >425 psi
  • Durability: Excellent; 20-year life
  • Flexibility: Excellent
  • Water Resistance: Excellent
  • Exterior Weathering: Very good; adhesive not recommended for direct exposure to sunlight
  • Staining: May stain marble
  • Odor: Mild solvent
  • Working Time: 10 min
  • Minimum Cure Time: 24 hr
  • Weight Per Gal: 9.4 lb (1.12 kg/l)
  • Viscosity: 230,000 CPS
  • Volatiles: 35%
  • Solids: 65%
  • Flammability: Extremely flammable; non-flammable when dry
  • Flash Point: 1°F (-17°C)
  • Coverage: 30 lineal ft. using 1/4" bead for 10 fl.oz
  • VOC: < 40% by wt. (384 g/L)
  • Certifications: ASTM C-557
  • Warranty: Limited Warranty

Reviews

Write Your Own Review
You're reviewing:Liquid Nails Heavy Duty Construction Adhesive - 10 oz
Your Rating